As a open type two roller mixing mill, it consists of seat, frame, roller, driving gear, lubricating device, cooling and heating device, adjusting device of roller nip, safety brake, motor and reducer, etc. The roller, with smooth surface after polished,is made of chilled cast iron. Steam and cooling water can be inputted in the empty roller to adjust temperature of roller. Two rollers rotate reversely with different speed, so that rubber materials are drawn into the gap of the two rollers for processing.
Characteristic and advantage:
1. For the convenience of maintenance and installation and reliable operation, the principal and auxiliary machine adopt wholly cast steel seat mixing.
2. Oil seal device is set in roll bearings and oil circuit lubrication adopts manual dry oil cup in to keep the lubrication well, operation convenient and environment clean.
3. All drive gears are made from cast steel, and of such advantages as high strength material, stable running, high wearability and long working life, etc.
4. Equipped with emergency brake equipment. When emergency accidents occur, it will brake automatically with reliability and safety.
5. Using hard-tooth surface gearbox to drive the rollers, which has lower noise and longer life.
6. In order to save labor and operate conveniently, roll gap adopts worm wheel and worm adjustment.
Two Roll Mill For Plastic & Rubber
This Two Roll Mill is a kind of plastic material mixing equipment with adjustable gap between two parallel rollers. Its main function is to mix and plasticize uniformly mixed raw materials. In the rub
TAG: Two Roll Mill For Plastic
Description
The Two Roll Mill is mainly used in rubber & plastic pruducts factory: natural rubber plasticating, raw rubber and compound mixing, as well as rubber warm-up and rubber sheeting. As a open type two roller mixing mill, it consists of seat, frame, roller, driving gear, lubricating device, cooling and heating device, adjusting device of roller nip, safety brake, motor and reducer, etc. The roller, with smooth surface after polished,is made of chilled cast iron. Steam and cooling water can be inputted in the empty roller to adjust temperature of roller. Two rollers rotate reversely with different speed, so that rubber materials are drawn into the gap of the two rollers for processing.
Characteristic and advantage:
1. For the convenience of maintenance and installation and reliable operation, the principal and auxiliary machine adopt wholly cast steel seat mixing.
2. Oil seal device is set in roll bearings and oil circuit lubrication adopts manual dry oil cup in to keep the lubrication well, operation convenient and environment clean.
3. All drive gears are made from cast steel, and of such advantages as high strength material, stable running, high wearability and long working life, etc.
4. Equipped with emergency brake equipment. When emergency accidents occur, it will brake automatically with reliability and safety.
5. Using hard-tooth surface gearbox to drive the rollers, which has lower noise and longer life.
6. In order to save labor and operate conveniently, roll gap adopts worm wheel and worm adjustment.
|
Item |
Specification |
Remarks |
|
Type |
XK-400-16 |
|
|
Roller Diameter |
400 mm |
|
|
Roller Width |
1000 mm |
|
|
Linear Velocity of Front Roller |
11r/min |
|
|
Speed Ratio of Rollers (Front/Rear) |
1:1.3 |
|
|
Maximum Roller Distance |
10 mm |
|
|
Production Yield |
20-35 KG per time |
Electric/oil/steam heating and circulating water cooling. |
|
Motor Powder |
45 KW |
|
|
Weight |
About 8000 KG |
|
|
Dimensions |
About 4920*1780*2100 |
|
